At sea, electrolysis occurs naturally when lightning strikes the salt water, creating anolyte solutions.
Environmental sterilising, disinfection, water and waste treatment technology

















EL900 - Product Data

The Envirolyte EL-900 unit has been designed for production of two activated solutions - ANK Neutral Anolyte, and K-Catholyte.

Easy operating procedures give the added benefit to rapid delivery of safe and fast acting disinfectant-Anolyte

The Envirolyte EL-900 units have been developed to produce Neutral Anolyte on the spot and on demand when disinfection, sterilisation, water and waste purification are required.

The weight and dimensions of the unit are kept low and small to ease handling, maintenance and transportation.

The strength of Anolyte in terms of active chlorine concentration can be adjusted by the current setting.

.....

Features of Envirolyte EL-900

A self-cleaning cycle has been programmed into the machine, which ensures easy maintenance and maximum productivity.

The unique design of the diaphragmatic cell ensures that electrolyte used in the production of activated solutions has maximum contact with the electrodes and therefore ensures the most effective use of energy and minimum salt consumption.

There is minimal hydraulic resistance against liquids flowing through the cell chambers and therefore an optimum flow rate is achieved.

The electrodes are specifically designed to endure high electrochemical loading as are the membranes, which separate the solutions.

The enclosure is made of non-corrosive materials. Tubes and connectors are of EPDN/PVDF plastics and are highly resistant against agressive solutions.

A simple on/off switch with a power indicator starts and stops the unit manually.


Specifications of Envirolyte EL-900

Enclosure: 400x300x180mm (hxwxd)
Weight: 14,5 kg
Input power: 230 VAC +-10%
Power consumption: ~1,5 KWT
Total output capacity: ~90L per hour
~90L per hour Anolyte: (pH 7,5 - 8,5 , ORP>800mV, C.ac ~500mg/l)

Activated solutions produced by Envirolyte EL-900 units
~90L per hour ANOLYTE
NEUTRAL ANOLYTE is used wherever pH is important (corrosion) and where possible evaporation of active chlorine cannot be avoided.

Amps active chlorine mg/l pH ORP mV (redox-potential)
~28-30 ~500 7,5 - 8,5 >800



For more info - contact us:

Email: info@envirolyte.co.nz



.

ENVIROLYTE
MANUAL UNITS

EL400
EL900
EL1200
EL2000
EL2400
EL3000
EL5000
EL6000

ENVIROLYTE
AUTOMATED UNITS

ELA300
ELA400
ELA600
ELA900
ELA1200
ELA1600
ELA2400
ELA3000
ELA5000
ELA6000
ELA10,000
ELA12,000
ELA18,000
ELA20,000
ELA30,000
ELA40,000



© Copyright 2009 - Envirolyte NZ Ltd